Does not fit Moser, Currie, Quick Performance, etc. UMIs bolt-in rear coilover kit allows full ride height, spring rate and damping adjustability while trailing arm adjustment enables fine tuning of instant center. The upper mount reinforcement is a direct bolt-in and holds a true 2-1/2 racing coilover with T-Bar. The FEA designed lower bracket bolts in using the standard trailing arm mounting hole as well as an additional reinforcement hole normally used by the standard rear shock. The 3-hole trailing arm adjustment enables fine tuning of instant center location for drag launch or auto-x/road race rear steer tuning.
The Viking shock is 19-way adjustable in both compression and rebound and ensures the perfect setting for every application. The 2-1/2 coilover springs are available in 14 110lb for drag use, 12 150lb for street use and 12 225lb for auto-x/road race. To see all the options for this kit. 100% designed, manufactured and raced out of Philipsburg, PA-USA and always US materials. Installation and Performance: Installing P/N 3048 control arm relocation brackets does require slight hazing on the bottom of the factory control arm mounts.
When used for drag racing UMI recommends welding the brackets to the rear end. Vehicles running 10.50 or faster or running slicks require welding. Bolted brackets are suitable for street performance, auto-x and road race Key Features: Brackets manufactured entirely from 3/16 Made In USA mild steel. Laser cut for consistency and a precise fit. Powder coated black for a long lasting finish.Viking Warrior double adjustable shocks offer 19 compression and 19 rebound adjustments. 3 spring rate options depending upon application. Built in control arm relocation allows instant center tuning. Designed, tested, manufactured and raced in Philipsburg, PA-USA Spanner Wrench & Thrust Bearing Kit: (Optional Please see our other items) Spanner wrench tool is used to adjust vehicle height while shock stays mounted. This wrench is needed to make height adjustments. The thrust bearing kit is designed to be placed between the spring and the spring seat attached to the shock. This makes for easier adjustments since the spring seat is rotating on a bearing. This kit is recommended for easier adjustments but is not needed to complete the installation. We do not recommend adjusting height on the car without a thrust bearing kit. Optional Shock Tower Brace: P/N 3055. Is designed to tie the left and right rear shock towers together for additional chassis reinforcement.
Has been designed to clear most exhaust systems however we cannot guarantee fitment with all exhaust systems. Note: Rear shocks may not clear all exhaust tail pipes. UMI is not responsible for exhaust clearance issues.Installation Photo's (Shown with Optional Equipment). UMI Performance offers many USA Made suspension upgrades for this vehicle. Enter your vehicle year make and model in the Store Search box on the left to narrow the results to your car.
Thank you for shopping at Matts Classic Bowties. The item "UMI Control Arm Relocation & Viking 78-87 G-Body Rear Coilovers 225 lb" is in sale since Monday, October 31, 2016.
This item is in the category "eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Suspension & Steering". The seller is "mattsclassicbowties" and is located in Lakeville, Minnesota. This item can be shipped to United States.