Aluminum Engine Oil Blow By Evacuation Tank Catch Can with Breathers & Fittings
Oil Evacuation Tank Catch Can. The evacuation tank catch can catches oil from your valve covers and your trans simultaneously. At low or hi boost oil is being pushed out of the engine through the valve covers.
The Crank case vent hoses are ran from the valve covers to the tank. Your Trans vent line is also ran to the tank. What you receive is the Tank, Breathers, and Tank Fittings ONLY! How the Evacuation Catch Can works. The engine gets blow by and creates pressure in the engine robbing horsepower. The pressurized fuel / air is pushed out of the valve covers which is also carrying oil enters the side of the box. This oil and air mixture has to pass through the aluminum vent holes. The gasses then travel through packed steel wool where the Oil is trapped but the gasses escape through the breather. The steel wool will absorb the oil that makes it up through the vented holes. The oil is then trapped in the steel wool and drips out.This will prevent the oil from running out of the Engine valve covers and Transmission overflow. This is a very common problem for cars that are under boost. You do not want to launch and hit a post of oil. The evacuation catch can comes with a -8 drain cap. The plug can be opened to release the excess oil the box traps.
The middle port is used to vent the transmission. The inlet fittings are -12 size. We decided to make the trans inlet standard on these and they come with that 1 port plugged. That plug can be removed and the trans vent plumbed into it. It come with the breathers, and a -8 drain plug cap for the bottom.This is designed for those who have removed their HVAC box and are running an AC delete cowl panel and Plate or one of our 1 Piece delete cowl panels. There is a pic of it mocked up on the AC delete plate in the pictures. You will see the mount and can is on an angle to be level once installed.
Weighs just under 5 lbs. Mounting points: 11 inches across outside tab to outside tab. Height 11 inches from bottom to top of the breather. Top distance from Block off to front of unit 7.25 inches. Bottom distance from Block off to front of unit 3 inches.Please Note: Hoses, Valve Cover Adapters and Fasteners are NOT INCLUDED. The item "Aluminum Engine Oil Blow By Evacuation Tank Catch Can with Breathers & Fittings" is in sale since Thursday, June 4, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Valve Covers". The seller is "gbodyparts" and is located in Bethel, North Carolina. This item can be shipped to United States.
- Country/Region of Manufacture: United States
- Material: Aluminum
- California Prop 65 Warning: Per California Law (Prop 65) WARNING: This product can expose you to chemicals, including lead, which is known to the state of California to cause cancer, birth defects, or other reproductive harm. For more info see p65warnings.
gov/ Prop 65 is an approved initiative that addresses concerns about exposure to chemicals known to cause cancer, birth defects, or other reproductive harm. To comply with Prop 65, businesses are required to display a warning for listed chemicals unless exposure is low enough to pose no significant risk of cancer or is significantly below levels observed to cause birth defects or other reproductive harm.
GBodyParts has chosen to display the Prop 65 warning based on the possible presence of one or more listed chemicals, without evaluating the level of exposure
- Type: Oil Catch Can
- Color: Silver Aluminum
- Surface Finish: Natural
- Manufacturer Part Number: OETCC
- Brand: Gbodyparts
- Fitment Type: Performance/Custom
- Warranty: 30 Days
- Mounting Hardware Included: No