Stamped steel sections of the factory frame can deflect under load and change the rearend geometry. BMRs Control Arm Reinforcement Braces (RB003) attach to the inner upper control arm mounts and lower control arm mounts, adding strength to the areas that are prone to deflection. Manufactured from heavy-duty 1.00-inch diameter, 0.120-inch wall DOM steel tubing, the reinforcement braces are a great way to reduce frame deflection. In addition, the reinforcement braces strengthen the upper control arm frame mounts by tying the upper mounts and lower mounts together.
BMR Suspension designed its Control Arm Reinforcement Braces to work well in street performance, drag race, and road race applications. The heavy-duty construction eliminates flex, giving you much improved repeatability on the street, starting line, or in the corners. The reinforcement braces provide additional strength to the rear suspension for a more responsive driving experience. BMR's RB003 are designed to strengthen the chassis, while keeping plenty of room mufflers and exhaust systems. This product is the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH levels and ride quality.When performance is a must, rely on BMR Suspension! BMR Suspensions Rear Suspension Kits are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U. Durable powdercoat finish - 2-3 hour installation time - Proudly designed in the U. Proudly made in the U.
These are available in RED or BLACK HAMMERTONE powder coat. 1978 - 1987 Buick Grand National 1978 - 1987 Buick Regal 1978 - 1987 Chevrolet Monte Carlo 1978 - 1987 Chevrolet El Camino 1978 - 1987 Chevrolet Malibu 1978 - 1987 Oldsmobile Cutlass 1978 - 1987 Pontiac Grand Prix Please see the "Compatibility" link at the top of the listing. Proudly Made in USA By American Workers! Hen BMR Suspension began back in 1998, it was difficult for performance automotive enthusiasts to find suspension products that had an innovative design and quality construction at an affordable price.
BMR turned this market void into a business philosophy, and has been serving our customer's needs ever since. In a manufacturing facility near Tampa, Florida, American workers cut, bend, notch, drill, and mill components from American-made DOM and chrome-moly steel. Then, every product is fixture-welded to maintain consistent quality.
Workers bead-blast parts and then powdercoat them using BMR's in-house powdercoating line. Finished parts are then assembled and packaged in the assembly department.
By manufacturing every product in house, BMR can control the quality at every stage of the manufacturing process. BMR Suspension products fit and work so well because they are street driven and track tested on BMR project vehicles. Past project cars include a 2005 Mustang drag car, a 2005 Mustang street car, a 2004 GTO, and a 1994 Camaro. BMR's current project vehicles include a 2019 Mustang GT, a 2016 Camaro, a 2016 Challenger Scat Pack, three 2015 Mustang GTs, a 2011 Mustang GT, a 2010 Camaro, and a 1969 Camaro.As if that were not enough, BMR also has a 2009 G8 GT, a 2008 Trailblazer SS, a 2003 Mach 1 Mustang, a 2000 Grand Prix GTP, a 1998 Camaro, a 1990 Mustang LX, a 1971 Camaro, a 1970 Chevelle, a 1967 Chevelle, and a 1968 GTO. But it is more than just great vehicles-virtually every BMR employee is a racer or hot rodder, as well. This love of racing is demonstrated everyday in BMR's customer service, design innovation, and manufacturing quality. By continuing to push the envelope in product design innovation and manufacturing technology, you can be sure that BMR Suspension will continue to offer the most innovative, quality-oriented, affordable suspension products available.
BMR product applications are warranted to be free from defects in material and workmanship under normal use and service for a period of (2) two years from the date of sale to the original purchaser. BMR product is designed to be used with OEM product and other BMR products. This applies to suspension products from other manufacturers as well as aftermarket exhaust products, aftermarket drivetrain products, and other aftermarket products.The right to make changes in the design or add to or improve on their product without incurring any obligation to install the same on products previously manufactured is expressly reserved. The item "BMR Suspension RB003 Control Arm Reinforcement Braces 78-87 G Body" is in sale since Friday, August 28, 2020.
This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Control Arms & Parts". The seller is "bmr_suspension_inc" and is located in Seffner, Florida. This item can be shipped worldwide.