Super Bright LED Headlight & Fog Light Conversion Combo Kit. Replace Factory Halogen High Beam.Replace Factory Halogen Low Beam. Pair 80W 8000LM Super White. Headlight Lumens: 30000LM /Pair, 15000LM /Bulb. Headlight Bulb Wattage: 240W /Pair, 120W /Bulb.
Headlight LED Chips: Customized 1860 LED Chips. Headlight Material: Aviation 6063 Aluminum Profile.Headlight Color Temperature: 6500K Cold White. Foglight Lumens: 16000LM /Pair, 8000LM /Bulb. Foglight Bulb Wattage: 160W /Pair, 80W /Bulb. Foglight LED Chips: 2pcs New CSP High Power High Brightness Chips. Foglight Bulbs Color: 6500K Clear White.
Foglight Material: Aluminum & High Temperature Resistant Quartz Tube. Pair(2pcs) 9005/HB3 High Beam LED Bulbs. Pair(2pcs) 9006/HB4 Low Beam LED Bulbs. Pair(2pcs) H11/H16/H8 Foglight LED Bulbs. Adopted opening high speed cooling fan design, less noise and better heat dissipation.Intelligent temperature control: Double protection circuit inside design, overheat protection and EMI, ensure longer lifespan and avoid interference problem. Zinc Alloy Material Reflector and 2 sides emitting ensure for the better beam pattern and brightness.
Customized 1860 LED Chips, light efficiency increased by 25% comparing with ordinary chip, better temperature resistance, lumens up to 9000LM, lifespan Over 80,000 hours. Our LED light come with exactitude light beam angle, no dazzling, no influence for the coming driver at left in front, improve brightness and distance. Built-in exclusive constant current decoding driver chip system, can decode more than 90% of vehicles.2pcs New CSP high power high brightness chips per bulb. 6500K white beam, natural beam pattern, a mass of clear white light with high penetration in the rain, foggy, dust days. 0.1S instant light up, super low load resistance.
Small illuminated surfaces, super bright high power chips, super condenser, provide more uniform and concentrated lighting. High brightness, low energy consumption, 180% more brightness than original lights.
Constant current temperature control system to ensure the normal operation of LED bulbs. High-performance protection, extended service life.
Excellent heat dissipation, 45% increase in heat dissipation than normal products. Power by advanced bright LED circuitry, 80,000 hours of lifespan.
Uniform light spread, powerful LEDs with 360° light beam. Optimized Cooling: Cold-pressed aluminum speed up the cooling rate to 30%, ensure long lifespan.
As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process. Put the vehicle into park or make sure it is securely in gear. Make sure to have the ignition turned off and the keys removed. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb. Please install car headlight dust cover to ensure the normal operation of the lamp to prevent dust and small ribbons to reduce the chances of bulb cooling fan broken to ensure the normal operation of the cooling system.After installation, dust prevention measures must be done, LED lamp life depends on the cooling performance is good or bad. The lamp heat mainly active cooling (fan-cooling based, supplemented by the whole aviation aluminum heat dispassion) as the main cooling method, the life of the fan in lamp bulb directly affects the life of LED lights. Please make sure it is correct.